5.3.2.4.1 Show Alarms
Select [Show Alarms] in [Alarm Menu] and press ENTER to go into this menu.
[Ch 0]
Alarm 1
Comp 1 overload
01/ 01 / 00 12:00am
Operation Menu
MAIN MENU
User can view all the fault/alarm records in this menu.
The record shows - Alarm type
- Alarm occurred date
- Alarm occurred time
- Alarm occurred unit (Chiller ID)
Beside that, user can erase the alarm record in this menu.
Press [ESC] to exit to [Alarm Menu].
5.3.2.4.2 Erase All Alarms
Select [Erase All Alarms] in [Alarm Menu] and press ENTER to go into this menu.
Are you sure ?
Press Enter to erase,
or ESC to exit
User can erase all the alarm/fault records at once in this menu.
Press [ESC] to exit to [Alarm Menu].
5.3.2.5 Display Menu
Select [Display Menu] in [Main Menu] and press ENTER to go into this menu.
DISPLAY MENU
Detrost Sensor
Discharge Sensor
Comp Run Time
This menu displays Defrost Sensor temperature, Compressor Discharge sensor temperature and Compressor Run
Time. Beside that, user can clear each Compressor Run Time for Chiller.
Press ESC to exit to [Main Menu].
16
To Next Page
Loading...
Need help?
General
