EasyManua.ls Logo

McQuay MAC 120 C - User Manual

McQuay MAC 120 C
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MAC-C-2004
Air-Cooled Mini Chiller
Models: MAC 080 C/CR
MAC 100 C/CR
MAC 120 C/CR
MAC 150 C/CR
M4AC 080 C/CR
M4AC 100 C/CR
M4AC 120 C/CR
M4AC 150 C/CR

Other manuals for McQuay MAC 120 C

Questions and Answers

  • R
    Ryan BishopAug 17, 2025
    What to do if McQuay MAC 120 C Chiller compressor does not start?
    • S
      Stephanie ParkerAug 17, 2025
      If the McQuay Chiller compressor doesn't start, several factors could be at play. First, check the power supply to ensure it's active. Also, inspect the fuses and circuit breakers; replace any blown fuses and reset breakers after fixing the underlying fault. A tripped safety mechanism could also halt the unit; identify the type of safety shutdown, correct the issue, and then restart. Loose wiring is another potential cause; check wire connections and tighten any loose terminal screws. If none of these resolves the issue, the compressor itself may be faulty, and you should contact your local dealer.
  • O
    ojohnsonAug 20, 2025
    Why is my McQuay MAC 120 C Chiller not cooling enough?
    • M
      Maria WagnerAug 20, 2025
      If your McQuay Chiller isn't providing sufficient cooling, several factors could be responsible. Begin by checking the thermostat setting and reset it to a cooler temperature if it's set too high. Other potential causes, such as a dirty condenser coil, insufficient refrigerant, improper water flow rate, or contaminated water in the system, require contacting your local dealer. Also, make sure that there is no obstacle blocking air inlet or outlet of the unit, and remove it if there is any.
  • H
    harperloriAug 23, 2025
    What to do if the compressor does not start in McQuay MAC 120 C?
    • E
      elizabeth62Aug 23, 2025
      If the compressor on your McQuay Chiller isn't starting, begin by checking the power supply to ensure it's properly connected. Also, inspect the fuses and circuit breakers; replace any blown fuses and reset breakers after fixing the underlying fault. Other potential issues include defective contactors or coils, which may need repair or replacement, tripped safety devices (determine the cause and correct it before restarting), or loose wiring (check and tighten all connections). If none of these steps resolve the issue, the compressor itself may be faulty, and you should contact a local dealer.
  • A
    Amanda OwensAug 26, 2025
    How to fix a fan that does not work on McQuay MAC 120 C?
    • T
      Tara MosesAug 26, 2025
      If the fan on your McQuay Chiller isn't working, start by checking the power supply to ensure it's properly connected. If the power supply is fine, the fan motor may be faulty, in which case you should contact a local dealer.
  • A
    Angela ClarkAug 28, 2025
    What to do if McQuay MAC 120 C shows reverse phase?
    • R
      Ricky JamesAug 28, 2025
      If the McQuay Chiller displays a reverse phase error, switch off the unit immediately and check the 3-phase wiring to ensure it's correctly configured.
  • W
    webbkeithAug 31, 2025
    What to do if R phase is missing in McQuay Chiller?
    • J
      Jennifer MaloneAug 31, 2025
      If the McQuay Chiller indicates a missing R phase, switch off the unit and inspect the 3-phase wiring to ensure everything is properly connected.
  • D
    Danielle HolmesSep 2, 2025
    What to do if S phase is missing in McQuay MAC 120 C Chiller?
    • D
      Donna KimSep 3, 2025
      If the McQuay Chiller indicates a missing S phase, switch off the unit and inspect the 3-phase wiring to ensure everything is properly connected.
  • C
    Christian PaulSep 5, 2025
    What to do if T phase is missing in McQuay MAC 120 C?
    • I
      igregorySep 6, 2025
      If the McQuay Chiller indicates a missing T phase, switch off the unit and inspect the 3-phase wiring to ensure everything is properly connected.
  • D
    Devin HarrisSep 8, 2025
    What to do if S & T phases are missing in McQuay MAC 120 C Chiller?
    • W
      William RogersSep 8, 2025
      If the McQuay Chiller indicates missing S & T phases, switch off the unit and inspect the 3-phase wiring to ensure everything is properly connected.
  • D
    Diane WilsonSep 12, 2025
    Why McQuay MAC 120 C Chiller shows Overload+?
    • S
      sgilbertSep 12, 2025
      If the McQuay Chiller is showing an overload error, it may be due to a high discharge temperature. In this case, you should check the refrigerant system.

Summary

Nomenclature

General Features and Specifications

Chiller Panel Controller

Chiller Panel Hardware, Installation, and Network

Describes panel hardware, keys, installation, and network setup procedures.

Chiller Panel Software, Menus, and Basic Operation

Covers software functions, menu structures, and basic operations like ON/OFF, mode, and temperature settings.

Chiller Panel Advanced Settings, Alarms, and Maintenance

Details advanced parameters, security, timers, alarms, sensor data, and panel reset procedures.

Chiller Problems and Troubleshooting

Air Cooled Chiller Specifications

Technical Data - Water Pressure Drop

Correction Factors for Glycol Use

Provides capacity factors and pressure drop adjustments for glycol-water mixtures.

Chiller Outlines and Dimensions

Accessory Hydraulic Kit Dimensions

Displays dimensions and components of the optional hydraulic kit.

Wiring Diagrams

Tolerance Settings and Jumper Configuration

Shows specific jumper settings and tolerance values for different chiller models.

Special Precautions for R407 C Refrigerant

Chiller Installation

Water Piping and Electrical Wiring Installation

Guides on water piping setup, insulation, and making electrical connections for the unit.

Servicing and Maintenance

Troubleshooting Guide

Schematic Diagram - Refrigerant Circuit

Part Lists and Exploded View

McQuay MAC 120 C Specifications

General IconGeneral
BrandMcQuay
ModelMAC 120 C
CategoryChiller
LanguageEnglish

Related product manuals