6.2 Chiller Operation Control
6.2.1 Starting
During power on for the Chiller Panel, it needs to take several times to collect information from the Chiller. At this time,
all the status will show ‘--’. Please ensure the particular Chiller exists in the network. When the process is completed,
user can start to control the Chiller using the panel.
01 / 01 /2000 12:00am
Status : --
Mode : --
Cool Temp : --
00
01 / 01 /2000 12:00am
Status : ON
Mode : Cooling
Cool Temp : 12.0ºC
00
In gathering information process Gathering information completed
6.2.2 Changing Display Unit
Chiller Panel (Master) can choose to control/display each Chiller status. This can be done in [Summary Pages] only.
01 / 01 /2000 12:00am
Status : ON
Mode : Cooling
Cool Temp : 12.0ºC
00
In [Summary Pages], press and hold ENTER button (1
second) to go into [Unit Selection] menu.
Unit Selection :
Select All
Select One : 0
Select “Select All” and press ENTER if user want
to control all Chiller in the network, or select
“Select One” to control a particular Chiller. Press
ESC to exit to [Summary Pages].
Unit Selection :
Select All
Select One : 0
Select a Chiller ID via UP or DOWN and press
ENTER to confirm or ESC to cancel.
19
To Next Page
Loading...
Need help?
General
