McQuay MAC 100 CR User Manual

6.2.4 Switching Mode
There are several ways to switch the mode for the Chiller. Please take note that some mode cannot be set due to
current Chiller model settings.
Mode
Chiller Model
Cooling Heating Boiling
Chiller ¥ xx
Heat Pump
¥
¥ x
Chiller / Boiler
¥
X ¥
Heat Pump / Boiler
¥
¥¥
Chiller + Boiler
¥
x Auto
Heat Pump+ Boiler
¥
¥ Auto
¥ - Allow to set
x - Not allow to set
Auto - Turn ON automatically
i) [Summary Pages]
Cooling - Press and hold COOL button.
Heating - Press and hold HEAT button (if it allows to set).
Boiling - Press and hold HEAT button again (if it allows to set).
ii) [Operation Menu]
<ENTER> <ENTER>
<ESC> <ESC>
Main Menu Summary Pages
Operation Menu
OPERATION MENU
Status : ON
Mode : Cooling
Cool Temp : 12.0ºC
Heat Temp : 40.0ºC
In [Operation Menu], select “Mode” and press
ENTER to start setting or ESC to exit to [Main Menu].
OPERATION MENU
Status : ON
Mode : Cooling
Cool Temp : 12.0ºC
Heat Temp : 40.0ºC
Toggle ON/OFF via UP or DOWN button, and then
press ENTER to confirm the change or ESC to
cancel.
21

McQuay MAC 100 CR Specifications

General

Brand	McQuay
Model	MAC 100 CR
Category	Chiller
Language	English