How to fix an unreadable remote controller for McQuay MDS030A Air Conditioner?
If your McQuay Air Conditioner's remote controller is unreadable, the first thing you should do is replace the battery. If that doesn't work, ensure the battery is installed properly.
How to fix Sensor broken(TH1 discharge temp) in McQuay MDS030A?
If the TH1 discharge temp sensor is broken in your McQuay Air Conditioner, refer to fault code E1 or replace the broken sensor.
Why is there condensing water on the front panel of my McQuay Air Conditioner?
Condensation on the front panel of your McQuay Air Conditioner could be due to high humidity. Try dehumidifying the room. Alternatively, the set temperature might be too low; try increasing the indoor temperature setting.
What to do if compressor stop and fan work normally in McQuay MDS030A?
If the compressor in your McQuay Air Conditioner stops but the fan continues to work normally, it could be because the indoor temperature is higher (when heating) or lower (when cooling) than the set temperature. Try resetting the temperature to your desired level.
General| Brand | McQuay |
|---|---|
| Model | MDS030A |
| Category | Air Conditioner |
| Language | English |
To Next Page
