McQuay MWM - Slm8

MCQUAY Service Guide Book Handset Operating Guide
15
4.8 SLM8
No. KEY No. KEY
1 MODE 8 OFF TIMER
2 TURBO 9 ON TIMER
3 SWING 10 DELAY TIMER
4 QUEIT 11 FAN
5 SET TEMP UP 12 ON/OFF
6 SET TEMP
DOWN
13 REAL TIME
CLOCK (RTC)
7 SLEEP
Operation Guide
1. MODE Button
• Press the MODE button to switch
operation from COOL, HEAT, DRY*, FAN.
DRY mode is available for selected
models only.
2. TURBO Fan Speed
• Press the TURBO key once to activate
Turbo fan speed. Turbo symbol will be
shown. To disable Turbo fan speed and
BACK to previous fan speed, press the
Turbo key once again. If user presses the
FAN button or QUIET button or turn off
the unit, the turbo speed will be disabled.
This speed is only valid during COOL
mode for selected models.
3. Automatic Air Swing
• Press the SWING
button to activate
the automatic air swing function. Press
again to stop the louver at the desired
direction.
Swing mode selection (for selected model)
• Press SWING
button for 4 seconds to
enter field setting mode.
• While in field setting mode, it will only
show SWING MODE
.
• Press temperature button to select
SWING MODE
rotation from Swing
Mode 1 to Swing Mode 3.
• There are 3 different SWING MODE,
which are:
Mode 1 Mode 2 Mode 3
SWING MODE will not activate unless SWING is
activated.
• If no mode changes within 4 seconds, unit
will operate According to the selected
SWING MODE
.
4. Quiet Fan Speed
• Press the QUIET key once to activate
Quiet fan speed. QUIET symbol will be
shown.
• To disable Quiet fan speed and BACK to
previous fan speed, press the QUIET key
again.
• If user presses the FAN button or TURBO
button or turn off the unit, the quiet speed
will be disabled. This speed is only valid
during COOL mode for selected models.
5. Temperature Setting
• Press the temperature button and set the
temperature of your choice by pressing
“ ” or “ ” button once,
temperature changes by 1°C or 1°F. The
default temperature setting range is from
16°C to 30°C (60°F to 86°F).
• Pressing both keys simultaneously will
toggle the temperature setting between ºC
and ºF.
• No temperature setting is allowed during
FAN mode (No set temperature display).
There is no room temperature display.
6. SLEEP Function
• Press the SLEEP button to activate the
sleep mode. SLEEP function is not
available in DRY mode and FAN mode.
7. ON TIMER and OFF TIMER
• The unit has 2-event timer, namely Timer
1 and Timer 2, each event has an ON
TIMER and an OFF TIMER.
• All timers are event-triggered timers and
can be overridden by the ON/OFF button
and Override function.