Me2, Fog Generator
Operating Guide, Rev: A/a 25 / 30
Technical specifications
Series MAX
APS
Series
Maximum fog output (per minute): 200 m
3
(7,063 ft
3
)
Fog colour: Pure white
Particle size: 0.5 to 0.7 microns
Fluid consumption: 2 L (59.5 oz / 0.53 US gal) per hour at 2.76 bar / 40 psi
Fluid type: MDG Neutral
TM
Fog Fluid ONLY
M.S.D.S. available on request
Fluid reservoir: 2.5 L (0.66 US gal) bottle
Gas type: Industrial Grade CO
2
or N
2
Gas pressure input: 4.15 bar / 60 psi max
Gas consumption: 2.68 kg (5.9 lb) per hour at 2.76 bar / 40 psi
Automatic Purging System™: Standard feature
Warm-up time: 8 minutes
Operating voltage: 100-250 VAC, 50/60Hz, 1 phase
Ground / Earth connection REQUIRED
Power consumption: 1415 W
Control signal: Manual (4 buttons keyboard + LCD)
USB (diagnostic & Bootload)
DMX / RDM Protocol
Operating temperature: 0 ºC to 50 ºC (32 ºF to 122 ºF)
Operating humidity: 90 % relative humidity @ 50 ºC (122 ºF), non-condensing
Storage temperature: -40 ºC (-40 º F) to 60 ºC (140 º F)
Storage humidity: 80% relative humidity @ 60 ºC (140 ºF)
Approval CE, CSA and UL pending
Dimensions 30 cm (12”) H x 18 cm (7”) W x 61 cm (24”) L
Weight: 17 kg (37 lb)
Shipping Weight: 21 kg (46 lb) without flight case
30 kg (66 lb) with flight case
To Next Page
Loading...