MDS E-PGM+ - E-PGM Tool Self-Check; Performing Tool Self-Test

MDS
34
14. E-PGM Tool Self Check
1. 툴에 연결된 디바이스를 제거함. ( Remove a device in a tool)
2. E-PGM+.exe 실행 ( Run E-PGM+.exe)
3. Device select <SELF_TEST>E-PGM+
4. Update 실행(Press update-button)
5. 업데이트 완료 후 TEST 실행 (Run test after update)
- E-PGM+는 “ENTER” button 누름.(E-PGM+ : Press ENTER button)
- E-GANG은 “START” button 누름(E-GANG : Press START button)
34
Pass
Fail