Meade CaptureView Manual&Nbsp;

12
Take a Still Picture
1. Press and hold down the Mode
button for 3 to 5 seconds to turn on
the camera. The camera will beep
and the camera icon displays on the
LCD. The counter, battery life and
resolution icons also display.
2. Point the binoculars at an object.
You may use the focus knob to
focus the image in the binocular, but
keep in mind that the camera has a
fixed focus and is not affected by the
focus knob.
3. Hold CaptureView steady and press
the Shutter button. Note that the
counter advances. For example, if
the counter reads “016,” this means
that this is your sixteenth
Taking Pictures and Video
If you want to... Do this...
The amount of pictures you can take:
High Resolution (640 x 480): 80
Low Resolution (320 x 240): 300
The number of photos you may take
will decrease if you have also taken
video.
Mode Shutter
8x22 Meade 3.07 5/10/07 9:21 AM Page 12

Meade CaptureView Specifications

General

Brand	Meade
Model	CaptureView
Category	Binoculars
Language	English