Meade CaptureView Manual&Nbsp;

18
Find Out How Much Power is Left
in the Batteries
Find Out Why CaptureView
is Beeping
Note: When the battery is low,
CaptureView sends out three short
high beeps. It is recommended you
download the pictures or change
the batteries at this time. If you
change the battery, remember that
you have 3 minutes to change the
batteries before your images
are deleted.
• Check the battery indicators on the
display.
Listen for the following patterns:
Power on: Two short high beeps.
Wake up: One long high beep.
Sleep: One short high beep.
Takes a picture: One short beep.
Failed to take picture due to
insufficient memory:
Five short high beeps
Low battery: Three short high
beeps (beeps only when powering
on).
Self-timer: Sends out 5 slow, then
several fast beeps before taking a
picture.
Operations
If you want to... Do this...
Full Power Indicator
Half Power Indicator
Low Power Indicator
8x22 Meade 3.07 5/10/07 9:21 AM Page 18

Meade CaptureView Specifications

General

Brand	Meade
Model	CaptureView
Category	Binoculars
Language	English