Mebay DC42D MK3 User Manual

DC4xD MK3 GENSET CONTROLLER USER MANUAL
6
Totally 6 relay’s output, among which 4 relay output can be self-configurable, each
relay can be set as max 20 functions, besides, there are 2 groups as non-contact
terminals.
With 5 switches input, up to 40 functions optional;
3 sensor simulation input connectors,and various display units can be configured.
Standard water-proof rubber gasket. The waterproof can reach IP54.
Module design: All the connections are adapted with European connectors so that
installation, connection, repair and replacement can be more easily.
Control Protection: Auto Start/Stop of genset, load transfer (ATS control) and
perfect failure display and protection.
3.Parameters Display
 Engine RPM
 Engine oil pressure
 Engine water temperature
 Engine fuel temperature
 Engine cylinder temperature
 Engine Tank temperature
 Engine fuel level
 Engine battery voltage
 Charging voltage
 UPS voltage(only for DC42DR-ABF MK3)
 Mains phase voltage L-N (only for DC42D MK3)
 Mains phase voltage L-L (only for DC42D MK3)
 Generator 3 Phase voltage L-N
 Generator 3 Phase voltage L-L
 Generator 3 phase current A
 Generator Frequency Hz
 Generator Power Factor COS φ
 Generator active power KW
 Generator apparent power KVA
 Generator reactive power KVar
 Current consumption KWH
 Total consumption KWH
 Total Crank times
 Current running time
 Total running time
 Maintenance notice
 Input status display
 Output status display
 Current date and time;
4.Protection
 Over speed

Mebay DC42D MK3 Specifications

General

Brand	Mebay
Model	DC42D MK3
Category	Controller
Language	English