ii Mecmesin Assembly and Installation of –i System Test Stands
Important
It is essential that you familiarise yourself with the contents of this Assembly and
Installation Manual, and the separate Guide to Safe Use of Mains Powered Test Systems
before attempting to operate your MultiTest-i or Vortex-i Test System.
Scope
This reference manual covers the following products and their derivatives: (example)
Force testing stands
Single-column stands MultiTest 0.5-i
MultiTest 1-i
MultiTest 2.5-i
MultiTest 5-i
Twin-column stands MultiTest 10-i
MultiTest 25-i
MultiTest 50-i
Torque testing stand
Vortex–i Torque cell capacities:
0.3, 1.5, 3, 6, 10 Nm
2016 © Mecmesin Ltd, supplied with Mecmesin test systems and not for redistribution
Part no. 431-393-07
To Next Page
Loading...
