Need help?Do you have a question about the Mecmesin MultiTest–i Series and is the answer not in the manual?
General| Frame Capacity | 5 kN, 10 kN, 25 kN, 50 kN (depending on model) |
|---|---|
| Force Capacity | 5 kN, 10 kN, 25 kN, 50 kN (depending on model) |
| Loadcell Accuracy | ±0.5% of reading |
| Software | Emperor™ software |
| Data Acquisition Rate | Up to 1000 Hz |
| Data Sampling Rate | Up to 1, 000 Hz |
| Units of Measurement | kN, N, mN, lbf, kgf, gf, ozf, mm, inch |
| Connectivity | USB |
| Safety Features | Overload protection, emergency stop |
| Test Types | Tensile, compression, flexure, peel, shear |
| Control Modes | speed |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Dimensions | Varies depending on model |
| Weight | Varies depending on model |
| Crosshead Speed Range | 0.001 - 1200 mm/min (depending on model) |
| Speed Range | 0.001 - 1200 mm/min (depending on model) |
To Next Page
