MEDEL PRO COMPONENTS (PIC. A)
1. Main unit
2. ON/OFF switch
3. Power cord
4. Air outlet
5. Filter holder
6. Nebulizer holder
7. Air vent openings
8. Handle
STANDARD ACCESSORIES
9. MEDELJET PRO nebulizer
10. Mouthpiece
11. Nosepiece
12. Air tube
13. Adult mask
14. Pediatric mask
15. Carrying case
IMPORTANT:
Read these instructions carefully before using this device.
GENERAL INFORMATION
MEDEL PRO is a compressor nebulizer system for aerosol therapy for intensive use.
MEDEL PRO is supplied with the MEDELJET PRO nebulizer, a new and patented exhalation/inha-
lation valves system, which increases the amount of inhaled medication, minimizing the medica-
tion waste.
EXCLUSIVE DOUBLE-VALVE SYSTEM OPERATING DETAIL
Illustration B
During inhalation phase, the inhalation valve (pic. B/16) opens, automatically-operated by
patient’s breath, thereby allowing an additional air flow (pic. B/17) to the compressor-generated
one (pic. B/18), therefore increasing the nebulization of medication and the medication quantity
effectively inhaled.
Illustration C
During exhalation phase, the inhalation valve (pic. B/16) closes avoiding medication to be disper-
sed in the environment while the exhalation valve (pic. C/19) opens thereby allowing the exha-
lation.
11
UK
To Next Page
Loading...