EasyManua.ls Logo

Medel Pro - Additional Safety Precautions; Operational and Maintenance Safety

Medel Pro
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
overheating.
14. Before performing any maintenance or cleaning operation, disconnect the device from the
main supply, by unplugging it or by turning the main supply switch off.
15. Some parts of the unit are so small that they could be swallowed by children; do not let unat-
tended children have access to the unit.
16. If you decide not to use the device any longer, it is recommended to dispose of it according
to the regulations in force.
17. Remember to:
- use this device only with medications prescribed by your doctor;
- make the treatment only using the accessory recommended by your doctor for the therapy;
- use the “nose piece” accessory only if expressly indicated by your doctor and paying
attention NEVER to introduce inside the nose the nasal bifurcation, but only bring it as close
as possible.
18. Verify that the medications prescribed by your doctor can be used with common compres-
sor nebulizer systems for aerosoltherapy.
DEVICE SAFETY SYSTEMS
THERMAL PROTECTOR
The inhalation device is provided with a temperature protection device which is released when the
device is overheating switching the unit off.
INSTRUCTIONS FOR USE
Remove the compressor from carrying case before use.
Check the unit before each use, in order to check for possible function anomalies and/or dama-
ges due to transport and/or storage.
When inhaling, sit upright and relaxed at a table and not in armchair as otherwise you will con-
strict your respiratory passages and impair the effect of inhalation.
1. As soon as you have unpacked the device, check it for visible damages or defects. In par-
ticular, check for cracks in the plastic housing, which could expose electrical components.
2. Check for accessories integrity.
3. Before using the device, proceed with the cleaning operations as described in the
“CLEANING AND DISINFECTION” section.
4. Open the nebulizer (pic. A/9) by turning the top in an anticlockwise direction (pic. D). On
the top an arrow, together with “CLOSE” sign, suggest how to close the nebulizer
5. Make sure the water conduction cone is properly fitted onto the air conduction cone inside
13
UK
PRO uk pag 11/18 2006 22-03-2006 16:28 Pagina 13

Related product manuals