Medela Harmony - Cleaning; Cleaning Before First Use and After Each Use

12
4
Rinse all parts with cold, clear
water (approx. 20 ° C) for
10 – 15 seconds.
Disassemble the pump set into
its individual parts.
5.1 Before using for the rst
time and after every use
5. Cleaning
l Take apart and wash all parts
that come in contact with the
breast and breast milk immedia-
tely after use, to avoid the
drying up of milk residues and
to prevent growth of bacteria.
l Only use drinking-quality water
for cleaning. To avoid contami-
nation, do not touch the inside of
the parts after cleaning.
I Do not clean the pump set with a
sharp object (such as a toothpick).
l Take care not to damage parts
of the pump set during cleaning.
I Some parts of the Harmony pump
set are very small (e.g. the O-ring
or the valve membrane). Check
that no parts are missing when you
reassemble the pump set after
cleaning.
Caution
i
l The pump set requires no
maintenance.
l If you clean the individual parts of
the pump set in a dishwasher,
parts may change in colour. This
has no impact on the function.
I Do not leave (parts of) the pump
set in direct sunlight or heat.
I Do not use chemical sterilisers.
Note
1