Medela Harmony - Troubleshooting; Issues with Suction; Issues with Milk Flow

26
10. Troubleshooting
Problem Solution
If there is low
or no suction
I Make sure the yellow valve head and the white membrane are clean
and not damaged.
I Make sure the membrane lies at on the valve head.
I Make sure the valve head is positioned sideways on the connector.
I Make sure the components of the handle are assembled correctly.
I Check all connections.
I Make sure the breast shield forms a complete seal around the breast.
If there is no
milk ow
I Ensure your breast pump is assembled correctly and there is suction.
I Relax and take a 10-15 minute break if expression is not achieved after
two consecutive pumping sessions.
I Consult your breastfeeding and lactation consultant or midwife if
expression still does not occur.
In the case of a product failure, please contact your local subsidiary.
You can nd the addresses on the reverse of this instruction manual.