Medela Swing Flex - Preparing for Pumping - Power Options; Mains Operation; Battery Operation

1616
7. Preparing for pumping
Info
i
7.1 Mains operation
• You can operate the SwingFlex / Swing
Maxi Flex breast pump via battery or
mains.
• Battery operation:
The batteries do not need to be removed
when the mains adapter is used for
pumping.
• Regularly check the condition of the
batteries in the motor unit.
• If Swing Flex / Swing Maxi Flex will remain
unused for a longer period of time,
remove the batteries from the battery
compartment.
• Batteries last for 4 – 6 pumping sessions
(approx. 1 ½ hours pumping time).
Plug the mains adapter cord into
the motor unit.
• Mains operation:
Follow the exact order of the steps.
• Only use the mains adapter supplied with
the Swing Flex / Swing Maxi Flex.
• Make sure the voltage of the mains
adapter is compatible with the power
source.
Warning
1
7.2 Battery operation
1
Open the battery compartment on
the back in the direction of the arrow.