FAQ Medeli keyboards
MIDI CONNECTION
Connection and Driver
Step 1: Preparation
You can connect the keyboard to a PC or laptop through either the
MIDI port or the USB port.
● Connection through MIDI port: make sure the MIDI Adapter is
compatible to your computer. If not, please visit its website and see if
there’s an updated driver for the MIDI Adapter.
● Connection through USB port: it will automatically install an internal
driver for the operating system. For more details, please check the USB
Compatibility List with OS.
Step 2: Turn off the keyboard.
Step 3: Connection
● Through MIDI port: plug MIDI IN cable to MIDI OUT port of the keyboard
and/or MIDI OUT cable to its MIDI IN port.
● Through USB port: connect the keyboard with a USB cable.
Step 4: Check if the module is properly connected by doing the followings:
● Turn on the computer.
● Switch on the keyboard and your computer will recognize it as “USB
Audio Device”. You can find “e-Organ” or “USB Audio Device” on the
“Device Manager” window once the connection is successful.
● In case your computer fails to recognize the keyboard, please try again
with another computer, as some internal USB Audio drivers will become
invalid when an unknown driver is automatically installed.
Please download MIDI Connection Guide for details about the MIDI
Connection and Device Recognition.
To Next Page
Need help?
General
