Device Recognition
Record a MIDI Song
Step 1: Install a MIDI sequencer software on your computer. Make sure
the keyboard is properly connected and recognized by the
computer.
Step 2: Run the sequencer software, and “USB Audio Device” will appear
on the list of input MIDI devices.
Step 3: Select “USB Audio Device” from the Input options, and now it’s
ready to record your songs.
SD CARD
Q: How to use a SD card?
A: Please follow the 4 steps below:
Step 1: Get the right SD card. You can check it on the Storage Device
Compatibility List.
Step 2: Format the card with your computer before using it.
Step 3: Insert the card to the CARD slot of the keyboard. If poor
connection occurs, please clean the metal connection part and try
again.
Step 4: Screen will display a card icon or card menu upon successful
connection.
FACTORY SETTING
Q: How to restore my keyboard to its factory setting?
A: Press down [ + / YES ] and [ - / NO ] buttons, and at the same time turn on
the instrument.
PC SOFTWARE
Q: Do you have any PC software to make styles from MIDI files?
A: You can access it from the Downloads page.
STYLES LOAD
Q: Do you have any other style for my keyboard?
A: You can access it from the Downloads page.
To Previous Page
Loading...
