15
The Mixer allows you to adjust separately the volume of different tracks.
1. Press the [MIXER] button to enter the mixer menu, the LCD displays
the current mixer track.
2. Repeatedly press the [MIXER] button to select the track you want.
Then use [+]/[-] buttons to change the parameters.
The option and parameters are as follows:
Note:
It will exit the mixer menu if there is no operation in 3 seconds.
Pressing [+] and [-] buttons at the same time will mute the selected
track, the LCD will display “OFF”. Press the two buttons at the same
time again to unmute the track.
Mixer
Arpeggiator
The arpeggiator function will automatically generate arpeggios.
Simply play a chord with your left hand, and the instrument will play a
preset arpeggio pattern to produce a beautiful melody.
Turn the Arpeggiator on or off
Press and hold the [ARP.] button for 2 seconds to turn on the
function. The corresponding indicator will be lit. Press and hold the
[ARP.] button for 2 seconds again to turn off the function. The
corresponding indicator will light off.
Note:
Each sound is matched with a preset arpeggio pattern, so when you
change the sound, the default arpeggio pattern will change as well.
The Split Point of Arpeggiator
When you turn on the arpeggiator, the keyboard will be split into two
areas. Play chords in the left hand area, and melody in the right hand
area. The default split point is the same as in the split function: F#3
(19).
Options
Adjust the Accomp volume
Adjust the Rhythm track volume
Adjust the Bass track volume
Adjust the Chord 1 track volume
Adjust the Chord 2 track volume
Adjust the Chord 3 track volume
Adjust the Upper 1 track volume
Adjust the Upper 2 track volume
Adjust the Lower track volume
LCD Display
XXX Accomp
XXX Rhythm
XXX Bass
XXX Chord1
XXX Chord2
XXX Chord3
XXX Upper 1
XXX Upper 2
XXX Lower
Range
0-32
0-32
0-32
0-32
0-32
0-32
0-32
0-32
0-32
ARP.
MIXER
To Next Page
Loading...
Need help?
General
