To Next PageTo Next Page
Need help?Do you have a question about the MEDIATEK LinkIt Smart 7688 and is the answer not in the manual?
General| Architecture | MIPS24KEc |
|---|---|
| Clock Speed | 580 MHz |
| RAM | 128 MB DDR2 |
| Flash Memory | 32 MB |
| Wi-Fi | 802.11 b/g/n |
| Ethernet | 10/100 Mbps |
| USB Ports | 1 x USB 2.0 Host |
| Operating System | OpenWrt |
| GPIO | Yes |
| PWM | Yes |
| ADC | Yes |
| Operating Voltage | 3.3V |
| Interfaces | UART, I2C, SPI |
| Power | 5V |
| Processor | MediaTek MT7688AN |
Describes the MediaTek LinkIt Smart 7688 as an IoT development platform for home, office, and cloud applications.
Provides a summary of the technical specifications for the MT7688AN System-on-Chip.
Lists the main features and capabilities of the LinkIt Smart 7688 development board.
Details the functions and usage of the physical buttons on the LinkIt Smart 7688 board.
Explains the meaning and patterns of the LEDs on the LinkIt Smart 7688 board for status indication.
Discusses the antenna support options available for the LinkIt Smart 7688 development board.
Describes the USB host capability for connecting external USB devices to the development board.
Explains the USB power source and estimated power consumption for the development board.
Lists the necessary and optional accessories required for using the LinkIt Smart 7688.
Information about the breakout board, marked as To Be Determined (TBD).
Provides instructions on how to access and use the JTAG interface for debugging the MT7688AN.
Presents the detailed technical specifications of the LinkIt Smart 7688 development board.
Illustrates the pin layout and connections for the LinkIt Smart 7688 development board.
Highlights the key features of the LinkIt Smart 7688 Duo development board.
Describes the buttons and their respective functions on the LinkIt Smart 7688 Duo.
Explains the LED indicators and their patterns for the LinkIt Smart 7688 Duo board.
Refers to antenna support details for the LinkIt Smart 7688 Duo, same as standard board.
Details the USB host capability for connecting external devices to the Duo development board.
Covers the USB power source and consumption details for the LinkIt Smart 7688 Duo board.
Lists accessories for the LinkIt Smart 7688 Duo, noting they are the same as the standard board.
Provides instructions for accessing the JTAG interface on the LinkIt Smart 7688 Duo.
Presents the technical specifications for the LinkIt Smart 7688 Duo development board.
Illustrates the pinout diagram for the LinkIt Smart 7688 Duo development board.
Lists compatible operating systems for accessing and developing with LinkIt Smart 7688 boards.
Introduces OpenWrt as the embedded Linux operating system used by the LinkIt Smart 7688.
Describes the network configurations available: Access Point and Station modes.
Explains how the LinkIt Smart 7688 board functions as an Access Point for local area networks.
Explains how the LinkIt Smart 7688 board connects to an existing Wi-Fi Access Point.
Details the methods for configuring the LinkIt Smart 7688 development board.
Provides steps to access and use the board's Web User Interface for configuration.
Outlines methods for accessing the system console via SSH or a Serial to USB cable.
Guide to connecting to the system console of the LinkIt Smart 7688 using SSH.
Provides instructions for connecting to the system console via a Serial to USB cable.
Details the procedures for upgrading the device firmware using Web UI or a USB drive.
Explains the steps required to upgrade the bootloader on the development board.
Describes how to perform a Wi-Fi reset to put the device into Access Point mode.
Provides instructions for resetting the LinkIt Smart 7688 to its factory default settings.
Guides on connecting the LinkIt Smart 7688 to a network as a Wi-Fi station.
Uses console commands to configure the LinkIt Smart 7688 for station mode operation.
Explains how to view system information on the LinkIt Smart 7688 using its Web UI.
