Medion E66050 - Equaliser; Sleep

53
DE
EN
NL
FR
IT
ES
Enter Tune -/+ controller to confirm your selection.
Set the display brightness here for when the display comes on.
 Use the Enter Tune -/+ controller to select the required setting and press the En-
ter Tune -/+ controller to confirm your selection.
8.6. Equaliser
 Press the Menu button in any playback mode.
 Use the Enter Tune -/+ controller to select the <System> menu and press the
Enter Tune -/+ controller to confirm your selection. Press the Menu button in
any playback mode.
 Use the Enter Tune -/+ controller to select the <Equaliser> menu and press the
Enter Tune -/+ controller to confirm your selection.
Select a preset equaliser setting (Normal, Classic, Jazz, Pop, Rock or My EQ) here.
 Use the Enter Tune -/+ controller to select the required setting and press the En-
ter Tune -/+ controller to confirm your selection.
Select <My EQ> to store an equaliser setting.
 Use the Enter Tune -/+ controller to select the <My EQ> menu and press the En-
ter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select the <Treble> menu and press the En-
ter Tune -/+ controller to confirm your selection.
Select the required amplification of high frequencies (-7 to +7) here.
 Use the Enter Tune -/+ controller to select the <Bass> menu and press the En-
ter Tune -/+ controller to confirm your selection.
Select the required amplification of low frequencies (-7 to +7) here.
8.7. Sleep
 Press the Menu button in any playback mode.
 Use the Enter Tune -/+ controller to select the <System> menu and press the
Enter Tune -/+ controller to confirm your selection. Press the Menu button in
any playback mode.
 Use the Enter Tune -/+ controller to select the <Sleep> menu and press the En-
ter Tune -/+ controller to confirm your selection.
Set a time after which the device is to switch off, or deactivate the sleep mode here.
 Use the Enter Tune -/+ controller to select the required setting and press the En-
ter Tune -/+ controller to confirm your selection.
The symbol is shown on the display as soon as a sleep timer has been set.
43320 ML Content Final.indb 5343320 ML Content Final.indb 53 12.07.2022 09:31:5012.07.2022 09:31:50