Medion E66050 - Audio Setting

58
11.3. Audio setting
In the audio setting menu, you can set whether the radio is to play in mono only or
stereo. In case of poor reception, switching to mono may improve station playback.
 Press the Menu button.
 Use the Enter Tune -/+ controller to select the <Audio Setting> menu and
press the Enter Tune -/+ controller to confirm your selection.
 Use the Enter Tune -/+ controller to select <forced Mono> and press the Enter
Tune -/+ controller to confirm your selection.
All stations are played in mono.
 Use the Enter Tune -/+ controller to select <stereo allowed> and press the En-
ter Tune -/+ controller to confirm your selection.
Stations with sufficiently strong reception are played in stereo.
11.3.1. Setting stations manually
Manually set the required frequency band here.
 Use the Enter Tune -/+ controller to select the required FM frequency.
The set frequency is now played.
11.3.2. Storing favourites
Store the required station in a programme position that you have selected.
 Use the Enter Tune -/+ controller to select the required station.
 Press and hold one of the 4 station memory buttons 1, 2, 3, 4+.
 Use the Enter Tune -/+ controller to select a memory slot from 1–40 and press
the Enter Tune -/+ controller to confirm your selection.
Memory slots 1–4 can be called up directly using station memory but-
tons 1–4. Press and hold the 4+ button to select further memory slots
43320 ML Content Final.indb 5843320 ML Content Final.indb 58 12.07.2022 09:32:0212.07.2022 09:32:02