What does error E1 mean on a Meditech ABPM-05 Blood Pressure Monitor?
If your Meditech Blood Pressure Monitor displays error E1, it means the measurement timeout is over, and the measurement had to be aborted because the patient was moving.
What does error E32 mean on my Meditech Blood Pressure Monitor?
If the Meditech Blood Pressure Monitor displays error E32, it means that the cuff is clogged or the rubber tube is broken.
What does error E9 mean on a Meditech Blood Pressure Monitor?
If the Meditech Blood Pressure Monitor displays error E9, it means that an external electric signal, such as static discharge, disturbed the operation of the device.
What does error E34 mean on a Meditech Blood Pressure Monitor?
If the Meditech Blood Pressure Monitor displays error E34, it means that the patient did not wear the cuff.
What does error E90 mean on a Meditech ABPM-05 Blood Pressure Monitor?
If your Meditech Blood Pressure Monitor displays error E90, it means that the device could not measure due to a hardware error.
What does error E8 mean on a Meditech ABPM-05?
If your Meditech Blood Pressure Monitor displays error E8, it means that the pressure in the pneumatic system exceeded the preset pressure limit.
What does error E2 mean on a Meditech ABPM-05?
If your Meditech Blood Pressure Monitor displays error E2, it indicates that the measurement was stopped by pressing a button, and the display shows "OFF" on the LCD.
Why does my Meditech Blood Pressure Monitor show error E3?
If your Meditech Blood Pressure Monitor displays error E3, it means the batteries exhausted during measurement.
Why does my Meditech ABPM-05 Blood Pressure Monitor show error E4?
If your Meditech Blood Pressure Monitor displays error E4, it means the batteries were replaced during measurement.
What does error E99 mean on a Meditech ABPM-05 Blood Pressure Monitor?
If your Meditech Blood Pressure Monitor displays error E99, it means that the device does not start automatic measurement until the next programming.
Guides the user through installing the CardioVisions or EasyABPM software on a PC.
Details setting up PC communication for ABPM-05 via USB and BlueBP-05 via Bluetooth.
Provides steps to test communication between the monitor and the PC using CardioVisions software.
Explains how to program the monitor by entering patient data and creating a monitoring plan.
Instructs on correctly applying the cuff and attaching the monitor to the patient for accurate measurements.
Details the process of retrieving recorded data from the monitor using the software after the monitoring period.
Addresses electrical safety, patient contact, hygienic considerations, and general safety warnings.
Offers guidance for resolving common issues and lists support resources.
Lists and explains error codes displayed by the device for troubleshooting.
General| Brand | Meditech |
|---|---|
| Model | ABPM-05 |
| Category | Blood Pressure Monitor |
| Language | English |
To Next Page
