Medivators DSD-201 - Disinfectant Filter Cartridge Replacement

Př A
>
Za
MEDIVAT
REPROCESSING SYSTEMS
Completing the Disinfection Process
130
1.
a
은
D
When the disinfection process is complete, the process indicator light illuminates and
the message “Completed” displays on the LCD screen.
- If automatic log printing is enabled, the log is printed.
For optional lid locks: press the STOP button to unlatch the lid.
Open the reprocessor lid.
Remove the basin floating lid.
Verify the hook-ups are securely connected to the scope.
- Ifthe connections are loose, reconnect the hook-ups and repeat the cycle to ensure
the scope is properly disinfected and rinsed.
6. Disconnect the hook-up connectors from the endoscope.
7. Remove the endoscope from the basin.
MM03-0047 Revision D