Medivators DSD-201 - Numeric Keypad Functionality

10 MM03-0047 Revision D
REPROCESSING SYSTEMS
Electrical Supply
Domestic reprocessors are supplied with a hospital grade, grounding plug that can be connected to
any standard 110-130VAC outlet. International reprocessors are supplied with a standard ground-
ing European plug that connects to 220-240VAC outlets.
We recommend surge protectors be used for protection against power spikes and surges. The
reprocessor must be plugged into or connected to a fused branched circuit.
Caution! The reprocessor does not have an on/off switch. Be sure
the reprocessor is positioned so that the power cord or
main circuit breaker is accessible at all times.
Warning! The reprocessor must be protectively grounded.
ας
Air Supply
Compressed air is required (30 - 60 psi/2.1 - 4.1 bar). If you did not purchase the air compressor
option with the reprocessor, be sure to make the compressed air connection to the labeled fitting
on the side of the cabinet.
Warning! This air must be supplied from an oil free air source.