Need help?Do you have a question about the Medline excel k4 qr and is the answer not in the manual?
General| Brand | Medline |
|---|---|
| Model | excel k4 qr |
| Category | Wheelchair |
| Language | English |
Engage wheel locks before entering/leaving chair, or during transport. Ensure legrests don't unlock them when swung back.
Release lock via front rigging lever, swing outward, lift assembly to remove.
Adjust footplate height for thigh support; ensure 2.5" ground clearance.
Lift legrest assembly to desired height; it locks automatically. Lower using lever.
Depress plastic paddle to unlock front of arm and swing up.
Relocate rear wheel axle to lower frame by 2 inches for Hemi height.
Consult professional for techniques; assistance recommended for inclines >10 degrees.
Wipe chrome parts weekly, clean metal parts with auto wax, dry immediately if wet.
Inspect for broken parts and loose fasteners; replace or tighten as needed.
Clean solid tires with damp cloth; replace if cracked or worn.
Check wheels for warping, spokes, and bearing condition; ensure free spinning.
Verify forks swivel freely. Check bearings and housing if binding occurs.
Check rear wheel tightness and bearings. Ensure quick release axle is locked correctly.
Check for proper function. Clean and lubricate if push button is stiff or dirty.
Check frame for bends, dents, cracks, or rust. Oil rear axles to prevent rust.
To Next Page
