WARNINGS:
Do not operate, maintain or adjust wheelchair
without reading and understanding all
instructions in the manual.
. This wheelchair has not been approved as a
seat surface to be used within a vehicle of any
kind. Always transfer the wheelchair user to an
approved vehicle seat and use restraints
available from the auto industry for this
application.
. Always make sure to complete.lyopen the
wheelchair before boarding the wheelchair.
Confirm that the seat tube is completely resting
in the seat cradles. Caution: Pinch point
between seat tubing and seat cradles.
. Do not operate this wheelchair on streets or
roadways.
. Do not operate wheelchair on inclines greater
than 10 degrees without assistance.
. Completely engage the wheel locks when
entering and leaving the wheelchair or using the
wheelchair in an elevator or a wheelchair lift.
. The wheelchair should be on a stable, level
surface and wheel locks should be engaged
before transferring the user to or from the
wheelchair.
. Do not adjust the footrests any closer than 2 ~
inches from the floor.
3
To Next Page
Loading...
Need help?
General
