-20-
Lying Down Measurement
a. Lie on your back.
b. Place your arm straight along your side with your palm
facing down.
c. The cuff should be placed at the same level as your heart.
7. TAKING YOUR BLOOD PRESSURE READING
a. After applying the cuff with your body in a comfortable position, press the “START”
button. A beep is heard and all display characters are shown for self-test. See
picture 7. Please contact the service center if segment is missing.
b. The current memory bank (U1, U2 or U3) should be blinking. See picture 7.1.
Picture 7 Picture 7.1 PIcture 7.2 Picture 7.4Picture 7.3 Picture 7.5
Picture 6
To Next Page
