Medtrum Simplifying Diabetes
www.medtrum.com
Charge Transmitter
• You can use a Transmitter charging cable (AC009) to charge
the Transmitter.
• It is recommended to recharge the Transmitter after each
sensor use.
• Do NOT store the Transmitter connected with a Sensor or a
USB charging cable. That may kill the transmitter battery.
• The indicator light will flash green when the Transmitter is
charging, and turn off when the Transmitter is fully charged
Fully charged
Charging
Not charging
Battery low
Battery empty
Charge PDM
The PDM requires an AC adapter with an output of DC 5.0V
Charge PDM & Transmitter
3
To Next Page
Loading...
