REPLACING THE CABLE
The X8 features a detachable, replaceable cable. This
feature can be used to troubleshoot specific parts or
to replace the Bluetooth receiver with a conventional
cable.
To detach the cable, grasp the earpiece and cable
connector firmly, and pull straight apart without
twisting.
Re-attach the cable by lining up the grooves on the
connector with the earpieces as shown. Push con-
nectors in until they fit securely. Make sure to attach
the cable connector marked “R” to the right earpiece
and the connector marked “L” to the left earpiece.
Visit MEEaudio.com for replacement cables and other
accessories.
notch
groove
To Next Page
Loading...
