EasyManua.ls Logo

Meec tools 004907 - Safety Instructions; Electrical Safety

Meec tools 004907
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
40
Vibration levels can deviate from the
declared value, depending on how the
machine is used. The following factors
can inuence the level of vibrations:
Incorrect use.
Unsuitable accessories.
Working with unsuitable materials.
Inadequate maintenance.
The following measures will reduce the risk
of personal injury:
Use the machine in accordance with
the instructions.
Avoid working at low temperatures.
Keep your body and especially your
hands warm.
Take regular pauses and move your
hands to stimulate circulation.
Electrical safety
The plug must be plugged into a correctly
installed earthed power point.
The machine must be connected to the
mains supply with a residual current device
with a maximum tripping current of 30 mA.
Check that the mains voltage corresponds
to the rated voltage on the type plate.
Do not touch the plug or power cord with wet
hands or other wet parts of your body. Do not
pull the power cord to unplug the plug.
Keep the power cord away from heat, oil,
sharp edges and moving parts. Avoid
bending, clenching, dragging or driving
over the power cord.
Do not carry or pull the machine by the
power cord.
Always check the power cord and plug
before they are used.
Pull out the plug immediately if the power
cord or plug get damaged during the work.
Do not use the machine if the power cord
or plug are damaged.
Pull out the plug when the machine is not
in use.
SAFETY INSTRUCTIONS
These instructions should be enclosed with
the machine if it is sold or passed on.
Do not use the machine if it is not working
properly. Take the machine to an
authorised service centre, or other
qualied personnel, to be checked and
repaired.
Do not use the machine in explosive
environments, such as in the vicinity of
ammable liquids, gases or dust.
Make sure that the machine cannot be
unintentionally started.
Do not use the machine if it cannot be
switched on and o with the power switch.
Store the machine out of the reach of
children and unauthorised persons.
Do not overload the machine. Do not use
the machine for any other purpose than
the one it is designed for.
Always wear appropriate personal safety
equipment.
Be careful. Never use power tools if you are
tired or under the inuence of drugs,
alcohol or medication.
The machine is not intended to be used by
persons (children or adults) with any form
of functional disorders, or by persons who
do not have sucient experience or
knowledge on how to use it, unless they
have received instructions concerning the
use of the machine from someone who is
responsible for their safety.
Keep children under supervision to make
sure they do not play with the machine.
Always take basic safety precautions when
using power tools.
IMPORTANT:
Risk of personal injury as a result of vibration.
Vibrations can cause personal injury.
Stop working immediately and seek
medical attention if you experience
numbness, itching, tingling or pain,
or if your skin changes colour.

Related product manuals