EN
43
Pull out the plug if the power
cord is damaged or cut.
Always hold the electric
chain saw with two hands.
Watch out for kickback.
Sound power level.
Safety class II.
Approved as per applicable
directives.
Recycle discarded product as
electrical waste.
TECHNICAL DATA
Rated voltage 230 V
~
50 Hz
Output 1600W
Safety class II
Speed, no load 7000 rpm
Cutting speed 13 m/s
Volume, oil tank 340 ml
Bar length 355 mm
Drive links 53
Drive link width 1.3 mm
Pitch 3/8"
Weight 4.9 kg
Sound pressure level, LpA 94 dB(A), K = 3 dB
Measured sound power level, LwA
104 dB(A), K = 3 dB
Guaranteed sound power level, LwA
107 dB(A), K = 3 dB
Vibration level 7.38 m/s², K = 1.5 m/s²
Always wear ear protection.
The declared vibration value, which has been
measured by a standardised test method, can be
used to compare dierent tools with each other
and for a preliminary assessment of exposure.
The measurement values have been determined
in accordance with EN 60745-2-13:2009+A1.
WARNING: The actual vibration level when
using power tools may dier from the specied
maximum value, depending on how the tool
is used. It is therefore necessary to determine
which safety precautions are required to protect
the user, based on an estimate of exposure in
actual operating conditions (taking into account
all stages of the work cycle, e.g. the time when
the tool is switched o and when it is idling, in
addition to the start-up time).
To Next Page
Loading...
