45
SAFETY INSTRUCTIONS
Read the user instructions carefully before use.
Save them for future reference.
WARNING: Read all warnings, safety instructions and other directives. Failure to
follow all the instructions and safety instructions can result in the risk of electric
shock, re and/or serious personal injury.
• This power tool is intended for drilling as well as for tightening and undoing screws.
• Do not use the drill driver for any other purpose than the one it is designed for.
• The term "power tool" in all the warnings below refers to your mains-powered
(corded) or battery-powered (cordless) power tool.
Work area
• Keep the work area clean and well lit. Dark and cluttered work areas increase
the risk of accidents and injuries.
• Do not use power tools in explosive environments, such as in the vicinity of ammable
liquids, gases or dust. Power tools produce sparks that can ignite dust and fumes.
• Keep children and onlookers at a safe distance when using power tools. You
can easily lose control of the equipment if you are distracted.
Electrical safety
• The plug on the drill driver must match the mains outlet. Never modify the
plug in any way. Never use an adapter with earthed power tools.
• Unmodied plugs and matching outlets reduce the risk of electric shock.
• Avoid body contact with earthed surfaces such as pipes, radiators, cookers and refrigerators.
• There is an increased risk of electric shock if your body is earthed.
• Do not expose power tools to rain or moisture. There is a greater risk of electric
shock if water gets into a power tool.
• Be careful with the power cord. Never use the power cord to carry or pull the
drill driver, or to pull out the plug from the mains socket. Keep the power cord
away from heat, oil, sharp edges and moving parts.
• Damaged or tangled power cords increase the risk of electric shock.
• If using the drill driver outdoors, only use an extension cord approved for
outdoor use. Cords intended for outdoor use reduce the risk of electric shock.
• If it is absolutely necessary to use power tools in damp conditions, use a mains
connection protected by a residual current device. Using an RCD reduces the
risk of electric shock.
User instructions for
drill driver
ENGLISH
To Next Page
Loading...
