ENGLISH
Symbols
The following symbols are used in the handbook and/or on the ma
chine.
States the risk of personal
injury or damage to the tool.
Read this handbook before use.
Disconnect the plug from the
mains immediately if the power
cord be
comes damaged.
Wear ear protection.
Wear eye protection.
Wear protective gloves.
Protective shoes are
recommended.
Never use the machine in the rain or in
damp or wet con
ditions. Risk of electric
shock.
Keep onlookers at a safe
distance.
Turn off the switch a
nd un
plug the
power cord b
e
fore ma
kin
g
adju
s
tments
and cl
eanin
g or if the power cord has
become tangled or damaged.
TECHNICAL DATA
Voltage 230 V ~ 50 Hz
Output power 1600 W
Bar length 14"(355mm)
Chain speed 13.1 m/s
Safety class II
Guaranteed sound power level, LwA 112 dB(A)
Sound pressure level, LpA 85.9 dB(A), K = 3 dB(A)
Vibration 8.393 m/s2
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
WARNING! The actual vibration level when using power tools may differ from the specified maximum
value, depending on how the tool is used. It is therefore necessary to determine which safety precautions
are required to protect the user, based on an estimate of exposure in actual operating conditions (taking
into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling,
in addition to the start-up time).
45
To Next Page
Loading...
