7
MULTIPOINT
Multipoint Pairing
Multipoint allows two Bluetooth devices to be connected to the Air-Fi Rumble
simultaneously. Both devices will need to be paired before multipoint can
be used.
To use two Bluetooth devices with the Air-Fi Rumble, first pair them by
following the pairing procedure described in the Pairing with Bluetooth
devices section for each device and then turn off the headset.
When turned on again, the Air-Fi Rumble will automatically attempt to connect
to the 2 most recently-paired devices, as long as they have Bluetooth enabled
and are within range. If a device that has already been paired does not
connect automatically, select “Air-Fi Rumble” from the Bluetooth menu of the
device.
If you no longer wiso connect to multiple devices, disable Bluetooth on the
device you do not want connected to the Air-Fi Rumble or remove the “Air-Fi
Rumble” pairing from the Bluetooth menu of the device.
Multipoint Functionality
Status Function Operation
Media playing
on one device
Play media on other device
Pause audio playback on the active
device and start audio playback on the
other connected device*
*It may take up to 10 seconds for audio to switch
Note: Incoming calls will always take precedence over other audio. If two
phones are connected to the Air-Fi Rumble, an incoming call on either phone
will trigger a ringtone alert and media playback will be paused if the call is
answered. Once the call is terminated, the Air-Fi Rumble will reactivate the
original device and resume playback (with most media applications).
For phone call controls, see the Controlling Phone Calls section.
To Next Page
Loading...
