Mega 105WR - Chapter 1 - Introduction; Minimum Requirements

Mega 105WR ADSL2+ Router - Easy Start Guide
1
Chapter 1 – Introduction
Thank you for purchasing a Mega 105WR Router. This Easy start guide is a complete guide to
configuring your Mega 105WR. It includes setup configurations for most operating systems. If
you are setting your Mega 105WR up with a PC running Microsoft Windows operating system,
it is suggested that you follow the much quicker “Quick Start Guide“ that was supplied in printed
form with your Router. (It is also available in soft copy on your Router CD.)
The Mega 105WR Router can be connected to any computer/notebook with a 10/100 Base-T
Ethernet card, USB port or IEEE 802.11b/g Wireless adapter. The Ethernet ports have the Auto
MDI/MDIX feature which allows both cross and straight UTP cable to be utilized. The Mega
105WR has an in-built IEEE802.11g Wireless LAN Access Point for wireless connectivity.
1.1 Minimum Requirements
• Pentium
®
MMX 233MHz
• A CD-ROM Drive
• At least one of the following, depending on how you wish to connect to the
Router
• For Ethernet connectivity - Ethernet card with TCP/IP Protocol
installed
• For Wireless connectivity - IEEE 802.11b/g Wireless adapter
• For USB connectivity - USB port
- One of the following operating systems
+Windows® 98 Second Edition
+Windows® Me
+Windows® 2000
+Windows® XP
+Windows® XP x64 Edition
+Macintosh OS 10.2 & above
• Web Browser - Microsoft Internet Explorer 4.0 (or later versions)
Or
- Netscape® Navigator 3.02 (or later versions)