Need help?Do you have a question about the Megger IDAX 300 and is the answer not in the manual?
General| Measurement Principle | Dielectric Frequency Response (DFR) / Frequency Domain Spectroscopy (FDS) |
|---|---|
| Test Voltage | 0 to 200 Vrms |
| Communication Interface | USB, Ethernet |
| Frequency Range | 0.1 mHz to 1 kHz |
| Measurement Type | Capacitance and tan delta (dissipation factor) |
| Measurement Channels | 2 |
| Temperature Measurement | Optional external temperature sensor |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Battery Life | Not applicable |
| Display | Color LCD |
| Data Storage | Internal memory, USB drive |
| Weight | Approx. 8 kg |
| Operating Temperature Range | -20°C to +50°C |
| Humidity Range | Up to 90% RH (non-condensing) |
| Application | Condition assessment of insulation in transformers, cables, generators and other high voltage equipment |
| Accuracy | Capacitance: ±0.5%, Tan delta: ±0.0001 |
Overview of IDAX instruments, their features, and applications in insulation diagnostics.
Highlights key features like automated analysis, ITC, and operation in high interference environments.
Details the warranty policy, including limitations and procedures for repairs.
Provides guidance for technical assistance and contact information for support.
General safety advice, symbols used, and information duty regarding REACH article.
Detailed safety instructions and precautions for operating the instrument.
Description of the front panel components and their functions for the IDAX 300 model.
Description of the front panel components and their functions for the IDAX 322 model.
Description of the front panel components and their functions for the IDAX 350 model.
Lists standard accessories included with the IDAX instruments.
Instructions for installing the IDAX 5 software on compatible operating systems.
Steps to prepare the instrument before use, including safety connections.
Procedures for preparing the test object before connecting the IDAX leads.
Explains the function of interlock switches and their effect on output safety.
Details measurement terminals, test modes, and connection examples for power transformers.
Step-by-step guide for performing moisture assessment measurements using IDAX 5 software.
Guide for ITC1 measurements, primarily for bushings and current transformers.
Overview of the IDAX 5 software interface and operation.
Describes the recent files and file opening section of the software interface.
Details the Nameplate tab and creating new tests within the software.
Explains the oscilloscope and its signal display within the software.
How to connect, disconnect, or run the IDAX unit standalone.
How to perform insulation modelling using the DFR data.
Recommends annual calibration and outlines two options for calibrating the IDAX unit.
Lists and explains common error messages encountered during instrument operation.
Explains the basic principle of measuring impedance using the IDAX instrument.
Describes the theoretical models used for presenting measurement results.
Details how to present impedance using different models.
Provides detailed technical specifications for the IDAX 300, 322, and 350 instruments.
To Next Page
