Need help?Do you have a question about the Megger MFT1500/2 and is the answer not in the manual?
General| Type | Multifunction Tester |
|---|---|
| Continuity Test Current | 200mA |
| Insulation Resistance Test Voltage | 250V, 500V |
| Display | LCD with backlight |
| Insulation Resistance Range | 0.01MΩ |
| Dimensions | 65 mm |
| Measurement Range | Various ranges for voltage, current, resistance, and insulation |
Essential safety warnings and precautions for instrument operation and electrical testing.
Covers general operation, warnings, polarity, and probe usage.
Covers test lock, loop impedance, and non-tripping loop test procedures.
Covers phase-to-earth, phase-to-neutral PFC tests and measurement considerations.
Introduces RCD tests (1/2I, I, 5I, DC, 0/180, Ramp) and setup procedures.
Details 5 x I RCD tests, auto RCD sequence, and ramp tests.
Guides on testing DC sensitive and time-delayed (selective) RCDs.
Covers electrical, voltage, and loop test specifications.
To Next Page
