Need help?Do you have a question about the Megger MFT1552 and is the answer not in the manual?
General| Type | Multifunction Tester |
|---|---|
| Insulation Resistance Test Voltages | 250V, 500V, 1000V |
| Insulation Resistance | 0.01MΩ to 1000MΩ |
| Loop Test Range | 0.01 Ω to 2000 Ω |
| Frequency Range | 45 Hz to 65 Hz |
| Voltage Measurement | 0 V to 600 V AC/DC |
| Current Measurement | 0 to 20 A |
| RCD Test | 30 mA, 100 mA, 300 mA |
| RCD Trip Time | 0 ms to 2000 ms |
| Display | LCD with backlight |
| Safety Standards | IEC 61010-1 |
Provides a detailed look at the MFT series instrument layout and key components.
Configures the instrument's touch voltage selection and display settings.
Covers live circuit warnings, test button lock, intelligent backlight, and auto shut-off.
Explains polarity indication and the use of the SPL1000 illuminated switched probe.
Discusses factors affecting PFC accuracy, noise indication, and measurement methods.
Covers thermal protection during loop testing and methods to reduce measurement errors.
Explains non-tripping (1/2 I) and tripping (1 x I, 5 x I) tests for RCDs.
Guides for pairing the MFT with various mobile and computer devices.
Sending test results for Insulation, Continuity, Loop, and RCD tests to a PC/mobile device.
Provides detailed electrical specifications including voltage, current, and insulation ranges.
Lists standard, optional, and model-specific accessories for the MFT testers.
Details the 3-year warranty, repair process, and conditions for service.
Information on locating approved service centres for instrument support.
Guides on installing Bluetooth dongles and the Widcomm driver software.
To Next Page
