Need help?Do you have a question about the Megger MFT1741 and is the answer not in the manual?
General| Continuity Test Current | 200 mA |
|---|---|
| Voltage Measurement | Yes |
| Loop Impedance Range | 0.01 Ω to 2000 Ω |
| RCD Test Currents | 10 mA, 30 mA, 100 mA, 300 mA, 500 mA, 1000 mA |
| Frequency Measurement Range | 15 Hz to 400 Hz |
| IP Rating | IP54 |
| Insulation Resistance Test Voltage | 50 V, 100 V, 250 V, 500 V, 1000 V |
| RCD Testing | Type AC, A |
| Display | Backlit LCD |
| Power Supply | 8 x 1.5 V AA cells |
| Continuity Measurement Range | 0.01 Ω to 1000 Ω |
| Insulation Resistance Measurement Range | 0.01 MΩ to 999 MΩ |
| PSC/PFC Range | 20 kA |
| Loop Testing | Yes (2-wire, 3-wire, High current and No Trip) |
Explains how the Confidence Meter analyzes electrical noise for accurate loop impedance tests.
Details the display elements of the instrument during loop impedance tests.
Discusses notes and important considerations for 3Lo loop impedance tests and RCD tripping.
Shows various connection configurations for 3Lo loop impedance tests.
Describes warning screens indicating circuit suitability for RCD types.
Illustrates the initial display during a loop impedance confidence test.
Explains how analogue arc fluctuations indicate noise levels during tests.
Details the display of final results and the meaning of the analogue arc.
Explains test completion criteria and how analogue arc size reflects confidence.
Contact and address details for Megger's UK manufacturing site.
Contact and address details for Megger's US Valley Forge site.
Contact and address details for Megger's German manufacturing site.
Contact and address details for Megger's US Dallas site.
Contact and address details for Megger's Swedish manufacturing site.
To Next Page
