Copyright© 2018 by Megger. All rights reserved.
The information presented in this manual is believed to be adequate for the intended use of the
product. If the product or its individual instruments are used for purposes other than those specified
herein, confirmation of their validity and suitability must be obtained from Megger. Refer to the
warranty information below. Specifications are subject to change without notice.
WARRANTY
Products supplied by Megger are warranted against defects in material and workmanship for a period
of one year following shipment. Our liability is specifically limited to replacing or repairing, at our
option, defective equipment. Equipment returned to the factory for repair must be shipped prepaid
and insured. Contact your MEGGER representative for instructions and a return authorization (RA)
number. Please indicate all pertinent information, including problem symptoms. Also specify the serial
number and the catalog number of the unit. This warranty does not include batteries, lamps or other
expendable items, where the original manufacturer’s warranty shall apply. We make no other warranty.
The warranty is void in the event of abuse (failure to follow recommended operating procedures) or
failure by the customer to perform specific maintenance as indicated in this manual.
M
Valley Forge Corporate Center
2621 Van Buren Ave
Norristown, PA 19403-2329
610-676-8500 (Telephone)
610-676-8610 (Fax)
www.megger.com
www.megger.com
MTO3XXX-UG-EN Rev 1 Feb 2018
2
www.megger.com
To Next Page
Loading...
