Need help?Do you have a question about the Megger MIT310 and is the answer not in the manual?
General| Continuity Test Current | 200 mA |
|---|---|
| Voltage Range | 0 to 600 V AC/DC |
| Safety Rating | CAT IV 600 V |
| Accuracy | ±2% ±2 digits |
| Operating Temperature | -10°C to +50°C |
| IP Rating | IP54 |
| Test Voltage | 250 V, 500 V, 1000 V |
| Display | LCD |
| Battery Type | 6 AA batteries |
| Storage Temperature | -20 °C to 60 °C |
Covers key safety notes, general functions, and voltage limits for instrument operation.
Describes the auto-ranging continuity measurement capabilities and test current.
Details the continuity buzzer mode, how to perform a test, and visual indicators.
Covers safety notes, automatic discharge, and the steps for performing insulation tests.
Details the steps for performing normal AC/DC voltage measurements.
Details continuity and buzzer test procedures specific to the MIT310A.
Describes insulation testing and test lock functionality for the MIT310A.
Details the data structure for storing continuity and insulation test results.
Outlines the process for storing insulation test results, similar to continuity tests.
Details battery types, fuse types, low battery warnings, and handling precautions.
Step-by-step guide for safely replacing the batteries in the instrument.
Lists general specifications, insulation ranges, and terminal voltage characteristics.
Covers instrument repair, handling static-sensitive devices, and warranty coverage.
To Next Page
