Megger MIT320 User Manual

M
MIT300 Series
Insulation and Continuity Testers
USER MANUAL
MIT300_UG_en_V11.qxp 14/1/09 3:03 pm Page 1
www.netzerotools.com
www.netzerotools.com

Megger MIT320 Specifications

General

Test Voltage	50 V, 100 V, 250 V, 500 V, 1000 V
Battery Type	6 x AA batteries
Safety Rating	CAT IV 600 V
Display	LCD
Safety Standards	IEC 61010

Summary

Safety Warnings

General Operating Instructions

Preparations for Use

Outlines essential steps before operating the instrument.

Safety Notes and Basic Functions

Covers crucial safety guidelines and fundamental operational aspects.

Continuity Measurement

Performing Continuity Tests

Step-by-step instructions for conducting continuity measurements.

Continuity Buzzer Functionality

Insulation Testing Procedures

Performing Insulation Test

Step-by-step instructions for conducting insulation resistance tests.

Insulation Test Features and Configuration

Analogue Instrument MIT310A Functions

AC/DC Voltage Measurement

Explains how to measure AC and DC voltages with the instrument.

Test Result Storage and Management (MIT330)

Storing Test Results

Explains the structure and process for storing continuity and insulation test results.

Replacing Batteries and Fuses

Battery Information and Replacement

Covers battery types, warnings, status indicators, and replacement procedures.

Preventive Maintenance

Fuse Replacement

Specifications

Insulation and Continuity Specs

Presents technical specifications for insulation and continuity measurements.

Voltage, Environmental, and Power Specs

Details voltage ranges, operating conditions, and power requirements.

Weight and EMC Compliance

Repair and Warranty