Need help?Do you have a question about the Megger MIT1025 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Safety Rating | CAT IV 600 V |
| Short Circuit Current | 5 mA |
| Interface | USB |
| Operating Temperature | -20°C to +50°C |
| Storage Temperature | -25°C to +65°C |
| Test Voltage | 50 V, 100 V, 250 V, 500 V, 1000 V, 2500 V, 5000 V, 10000 V |
| Power Supply | Rechargeable battery |
| Accuracy | ±5% up to 1 TΩ |
| Data Storage | 1000 test results |
| Test Current | 1 mA |
| Power Supply (Alternative) | Mains Power |
Essential safety rules for instrument operation and electrical circuit work.
Precautions and warnings for battery handling and usage.
Navigating menus, selecting modes, and using basic controls for testing operations.
Step-by-step guide for performing insulation tests, with safety and discharge procedures.
Guide for establishing communication between the MIT instrument and PowerDB software.
Explanation of instrument error codes and guidance for troubleshooting.
Instructions for safely replacing the instrument's internal battery pack.
Detailed electrical parameters, voltage ranges, current limits, and accuracy.
Specifications for altitude, operating temperature, humidity, and ingress protection.
Compliance with safety standards, EMC, and physical dimensions/weight.
To Next Page
