Megger MIT1025 User Manual

31
Accessories, Equipment and Spares
Accessories (all models) Part Number
Spare Li-ion Battery 1002-552
Included Accessories (all models) Part
Number
User guide CD-ROM
Power lead
3 m leadset x 3, medium insulated clips 1002-531
Included Accessories (MIT525, MIT1025, MIT1525)
USB cable
25970-041
PowerDB Lite software
3 m leadset x 3, medium insulated clips
3 m leadset x 3, large insulated clips (MIT1025 only)
3 m 15 kV leadset x 3, 15 kV clip
1002-531
1002-534
1002-949
Optional Accessories
HV test lead sets
3 m leadset x 3, medium insulated clips 1002-531
3 m leadset x 3, large insulated clips
1002-534
3 m leadset x 3, bare clips 8101-181
8 m leadset x 3, bare clips 8101-182
15 m leadset x 3, bare clips 8101-183
Screened HV test lead sets
3 m, 5 kV screened un-insulated small clips 6220-835
15 m, 5 kV screened un-insulated small clips 6311-080
3 m, 10 kV screened un-insulated small clips 6220-834
10 m, 10 kV screened un-insulated small clips 6220-861
15 m, 10 kV screened un-insulated small clips 6220-833
Other
CB101, 5 kV Calibration Box 6311-077
Calibration Certificate - CB101 1000-113
UKAS calibration Certificate CB101 1000-047

Megger MIT1025 Specifications

General

Display	LCD
Safety Rating	CAT IV 600 V
Short Circuit Current	5 mA
Interface	USB
Operating Temperature	-20°C to +50°C
Storage Temperature	-25°C to +65°C
Test Voltage	50 V, 100 V, 250 V, 500 V, 1000 V, 2500 V, 5000 V, 10000 V
Power Supply	Rechargeable battery
Accuracy	±5% up to 1 TΩ
Data Storage	1000 test results
Test Current	1 mA
Power Supply (Alternative)	Mains Power