Megger MIT1025 User Manual

28
Environmental Conditions
Altitude:
MIT515, MIT525, MIT1025
3000 m, test lead CAT rating valid to
2000 m, safe working practices must be
applied and clips must not be handled
until discharge is complete
MIT1525 3000 m
Operating temperature: -20 °C to 50 °C
Storage temperature: -25 °C to 65 °C
Humidity: 90% RH non-condensing at 40 °C
Ingress protection: IP65 (lid closed), IP40 (lid open)
GENERAL SPECIFICATION
Safety:
MIT515, MIT525, MIT1025
Meets the requirements of IEC 61010-1, CATIV
600 V to 3000 m
Instrument must be operated with all test leads
connected above 2000 m
MIT1525 Meets the requirements of IEC 61010-1, CATIV
1000 V to 3000 m
EMC: Meets the requirements of IEC61326-1
Dimensions:
(5 kV, 10 kV) L 315 mm x W 285 mm x H 181 mm
(15 kV) L 360 mm x W 305 mm x H 194 mm
Weight: 4.5 kg (MIT515, MIT525, MIT1025)
6,5 kg (MIT1525)

Megger MIT1025 Specifications

General

Display	LCD
Safety Rating	CAT IV 600 V
Short Circuit Current	5 mA
Interface	USB
Operating Temperature	-20°C to +50°C
Storage Temperature	-25°C to +65°C
Test Voltage	50 V, 100 V, 250 V, 500 V, 1000 V, 2500 V, 5000 V, 10000 V
Power Supply	Rechargeable battery
Accuracy	±5% up to 1 TΩ
Data Storage	1000 test results
Test Current	1 mA
Power Supply (Alternative)	Mains Power