Need help?Do you have a question about the Megger MIT525 and is the answer not in the manual?
General| Short Circuit Current | 3 mA |
|---|---|
| Operating Temperature | -20°C to +50°C |
| Storage Temperature | -25°C to +65°C |
| Weight | 4.5 kg |
| Interface | USB |
| Safety Rating | CAT IV 600 V |
| IP Rating | IP65 |
| Test Voltage | 500 V, 1000 V, 2500 V, 5000 V |
| Display | LCD with backlight |
| Power Supply | Battery |
| Test Modes | PI, DAR, DD |
| Battery Type | Rechargeable Li-ion |
| Battery Life | 6 hours continuous testing |
Instrument must be operated by suitably trained and competent persons.
Details of the Insulation Resistance Testers (IRT) range and models.
Highlights of the instrument's capabilities and functionalities.
Identification and description of the instrument's physical controls and indicators.
Steps for unpacking, initial setup, and preparing the instrument for use.
How to turn on, select voltage, and navigate instrument functions.
Details on selecting different insulation resistance test modes.
Explanation of breakdown and burn modes for insulation testing.
Step-by-step guide to conducting an insulation resistance test.
Specific safety precautions for 15 kV insulation tests.
Accessing saved data and procedures for downloading via PowerDB.
Interpreting error codes and troubleshooting instrument faults.
Detailed electrical parameters and ratings of the instrument.
To Next Page
