Need help?Do you have a question about the Megger MIT300 and is the answer not in the manual?
General| Voltage Range | 0 to 600 V AC/DC |
|---|---|
| Continuity Range | 0.01 Ω to 2000 Ω |
| Continuity Test Current | 200 mA |
| Accuracy | ±2% ±2 digits |
| Test Voltage | 250 V, 500 V, 1000 V |
| Display | LCD |
| Safety Rating | CAT III 600 V |
| Battery Type | 6 x AA |
| Safety Standards | IEC 61010-1 |
Introduction to the MIT300 series and a comparison of its variants.
Description of the LCD display and front panel layout for digital models.
Preliminary checks, supply voltage safety, and general operating notes.
Procedures for continuity tests and lead nulling.
Steps for insulation testing and utilizing the test lock feature.
Step-by-step guides for safely replacing batteries and fuses.
Covers insulation/continuity ranges, currents, voltages, and accuracy.
List of standard and optional accessories and their order codes.
To Next Page
